Article

📐 Battery Fitment Templates

Not sure a battery will fit your frame? Print our actual-size templates, cut them out, and hold them against your frame triangle to check clearance before you buy.

July 12, 20261 min read

📐 Battery Fitment Templates

Bafang 52V Dolphin ebike battery on its downtube mount

Not sure a battery will fit your frame? Before you buy, print our actual-size battery templates, cut them out, and hold them against your frame's triangle to check clearance. We recommend leaving about half an inch of clearance at the front and top so you can slide the pack on and off the mount. If it will not fit the triangle, a rear-rack mount is the usual fallback.

We offer printable PDF templates for each pack:

Print at 100% scale (no "fit to page") so the cutout is truly actual size.

Still deciding which pack is right? Take the Fitment Quiz or shop all kits & batteries.
Was this article helpful?

Related Articles

🔋 Battery Mount Compatibility / Interchangeability

Every battery ships with its own mounting bracket, and many packs share the same Shark mount so you can swap freely. Here's which brackets interchange and which are unique.

📐 BBS02 & BBSHD Motor Fitment Templates

Print our actual-size mid-drive and front-hub templates, cut them out, and test-fit them on your frame to confirm the motor fits before you spend a dime.

🏖️ Cruiser Bike & Beach Cruisers

Most beach cruisers convert beautifully, but watch for American bottom brackets, welded chainguards, and battery mounting before you order.

🔌 Front Hub Motor Cables & Length

The stock cable lengths for the 500W front hub kit, so you can tell whether long or stretched frames like trikes and recumbents will need extensions.

🏔️ Full Suspension Bike

Full-suspension frames convert well, but the moving rear end adds motor and battery clearance checks a hardtail never has. Here's what to verify.

Back to Compatibility & Fitment